handy

Handy DIY Plumbing Tips For The Homeowner

Where does your knowledge lie with plumbing? If so, would you like to enhance it? How high is your skill level? If you are somewhat vague on the answers to these questions, read on for some useful and insightful tips that can help.

If your pipes bang when you turn on the water, and all the pipes are anchored correctly, you should add some straps or cushion the pipes with a rubber blanket. There may be times when you will need to do both. Make sure that if you have copper pipes, you are not using galvanized straps.

Make sure you know where your home’s water shutoff is located. You never know when there might be an emergency involving a broken pipe or damaged connection that requires you to turn off the water right away. In addition, knowing where the shutoff is located is vital before you start any plumbing project, in case anything goes wrong.

To avoid wasting water and having a potentially high water bill, check your home for leaky faucets periodically. Fix any leaks that you find right away. You may be able to do the repair yourself, but if not, you may have to seek the services of a plumber to make the repairs.

Drain the sediment from the bottom of your hot water heater twice a year to keep the hot water heater working at its optimal levels. Simply open the drain valve and allow the water to run out into a bucket until the water runs clear. Then close the drain valve.

Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.

If you have a shower head that needs replacing, be sure to get one that is good quality. People usually opt for a cheap shower head instead of a quality product. However, they are inexpensive for a reason, this being that they are cheaply made and tend to break a lot easier.

Prevention will save you money in plumbing bills. The repairs that plumbers perform the most are for drains that are clogged. One major thing that causes clots is grease. It builds up over and time. You can help prevent grease build up by looking for a product on the market that will clean the grease out.

Have your pipes in your plumbing system frozen? You can skip the cost of hiring a plumber by using this method. First, open the faucet so steam produced by the thawing process can escape. Begin thawing close to the faucet, and move down the line as each section thaws out. Use a hair dryer or a heat lamp to warm along the pipe. Even though this method consumes quite a bit of time, it is safer than most other heating methods. Furthermore, it requires no cleanup.

Do you know more about plumbing than you previously did? Do you know what kind of plumbing system is in your home now? Have your plumbing skills improved? Are you aware of fittings and tools that are compatible with your home’s plumbing? Have you figured out how the equipment works? Hopefully, these tips created better answers to these questions.…